Dust Collection and Valves Blog
Technician in lab coat and hard hat standing on an elevated platform inspecting a dust collector unit.
, , ,

The Important of Ductwork in Dust Collection System | Aerodyne

Well-designed dust collector system, ductwork will be sized so that the airflow has enough velocity to keep the dust from falling out in the ductwork.
Industrial dust collection hood above a drum container.
, , ,

The Impact of Well-Designed Hoods in Dust Collection System | Aerodyne

Well-designed hoods are engineered so the dust generated by the equipment can be collected with the least amount of airflow possible.
Row of fabricated blue cyclone dust collectors lined up in a workshop.
, , , ,

5 Ways to Go Green in Dust Collection | Aerodyne

5 Ways to Go Green in Dust Collection. Pulse-on-demand controller. Cyclone pre-filter. Monitor airflow. Aerodyne Vacu-Valve. Clean and reuse filters.
Height comparison chart showing Aerodyne low-profile vertical and horizontal cyclones versus a standard cyclone.
, ,

5 FAQs of Small Cyclone Technology | Aerodyne

Smaller cyclones avoid many of the disadvantageous and time-intensive aspects of larger cyclones, including those relating to installation and compliance.
A large SplitStream cyclone dust collector loaded onto a flatbed trailer for transport.
, , , ,

High Temperatures Are No Problem for Cyclonic Dust Collector | Aerodyne

The Aerodyne SplitStream dust collector achieves high efficiency by forcing dirty gases into a powerful centrifugal motion.
Large industrial dust collection system with metal ductwork, cyclone, and support frame.
, , , , , ,

Questions to Ask When Evaluating Dust Collection System | Aerodyne

Dust collectors are made of various pieces, all of which have to be operating correctly for the system to operate as desired.
Packed tower wet scrubber utilizing water droplets and packing material for chemical, fume, and particulate removal.
, , ,

Top 5 Applications Where Standard Dust Collectors Fail | Aerodyne

Standard dust collectors often have operational issues with abrasive, sticky, and fibrous dusts. Top 5 Applications Where Standard Dust Collectors Fail
Large cyclone dust collector placed before a baghouse to increase removal efficiency and reduce filter load.
, ,

Top 5 Reasons to Use a Cyclone Before a Baghouse or Cartridge Collector | Aerodyne

Whether your baghouse or cartridge collector is 50 or 100,000 CFM, there are advantages to putting a cyclone before the baghouse or cartridge collector.
Various types of industrial material handling valves, including rotary, knife gate, double dump, and trickle valves.
, , , ,

Top 5 Questions to Ask When Choosing a Material Handling Valve | Aerodyne

Material handling valves come in all shapes, sizes, and varieties from rotary valves and knife gate valves to double dump valves and trickle valves.
Packed tower wet scrubber utilizing water droplets and packing material for chemical, fume, and particulate removal.
, ,

Wet Scrubbers Allow for Easier Collection and Removal of Certain Materials | Aerodyne

Wet Scrubbers Allow for Easier Collection and Removal of Certain Materials.
© Abanaki Corporation. All rights reserved.