You are here: Home1 / Cyclone Questionnaire

Cyclone Questionnaire

The following questions will help us quote the cyclone dust collector for your application. Please fill out this questionnaire and we will reach out to discuss your application.

Name(Required)

First Last

Country

State

Province / Region

State / Province / Region

Phone

Email(Required)

Project Details

1. Where is the dust coming from?

Please explain the process before and after the cyclone.(Required)

2. Is there a baghouse, cartridge collector, wet scrubber, or ESP dust collector after the cyclone? (required)

2. Is there a baghouse, cartridge collector, wet scrubber, or ESP dust collector after the cyclone?(Required)

Yes

a. How often do you clean or replace the filters?

b. What is the maximum pressure drop for the cyclone your fan can handle (inches of W.C.)?

c. Are you having any operational problems with the dust collector? If so, please describe.

3. Please provide the following:

a. Airflow (ACFM)(Required)

b. Temperature (°F)

c. Pressure/Vacuum available on fan (in W.C.)

d. Humidity

4. Please describe the solids

a. Flow rate (lbs./hr. or ft3/hr.)

b. Density of the solids (lbs./ft3)(required if lbs./hr. provided)

c. Are the solids...

Abrasive

Corrosive

Toxic

Sticky

Hygroscopic

Granular

Powder

Fragile

Friable

Other

Solids description (other)(Required)

d. Do the solids bridge?

e. Particle size distribution, if available

Click the + button to add additional sizes. If you prefer, you can attach specs by using the "Choose File" button below.

Size (µm)

Concentration (%)

Attach particle size distribution specs

Max. file size: 32 MB.

f. How would you describe the solids (ex. similar to sand, flour, etc.)?

If you have a picture of the solids, attach it here

Max. file size: 32 MB.

g. Is the dust explosive?

Yes

What is the K(st) and P(max) of it?(Required)

h. What type of explosion protection do you want?(Required)

Do you want Aerodyne to supply it?(Required)

Yes

5. What removal efficiency are you looking for the cyclone to do? What would you consider a success?

5. What removal efficiency are you looking for the cyclone to do? What would you consider a success?

6. Do you have space restrictions? Do you prefer vertical or horizontal design?

6. Do you have space restrictions? Do you prefer vertical or horizontal design

7. What type of discharge valve do you want?

7. What type of discharge valve do you want?

Rotary

Vacu-valve

Double dump

Knife/Slide Gate

Other

Other type of discharge valve(Required)

8. What materials of construction do you want?

8. What materials of construction do you want?

Painted carbon steel

304 stainless steel

316 stainless steel

Other

Other materials of construction(Required)

9. What class welding do you want?

9. What class welding do you want?

Carbon Steel Weld Specs - Class I

Continuous welds be achieved by MIG welding the external sides using filler. The weld will not have inclusions, cracks, holes or crevices. All slag and spatter is removed and there will not be any internal projections.

Carbon Steel Weld Specs - Class II

Continuous full penetration shall be achieved by MIG welding the internal and external sides using filler. The weld will not have inclusions, cracks, holes or crevices. All slag and spatter is removed and there will not be any internal projections.

Stainless Steel Weld Specs - Class A

Continuous full penetration shall be achieved by TIG welding the external sides using filler and fusing the internal sides. The weld will not have inclusions, cracks, holes or crevices. All slag and spatter is removed and there will not be any internal projections. All welds are passivated with acid treatment.

Stainless Steel Weld Specs - Class B

Continuous full penetration shall be achieved by TIG welding the external and internal sides using filler. The weld will not have inclusions, cracks, holes or crevices. All slag and spatter is removed and there will not be any internal projections. All welds are passivated with acid treatment. Internal welds are polished to 80 grit finish.

Stainless Steel Weld Specs - Class C

Continuous full penetration shall be achieved by TIG welding the external and internal with filler. The weld will not have inclusions, cracks, holes or crevices. All slag and spatter is removed and there will not be any internal projections. All welds are passivated with acid treatment. Internal welds are ground flush to 120 grit.

Other

9b. What class welding to you want? (Other)

Describe here or attach pictures/sketches/etc. below.

Class welding pictures/sketches/etc.

Drop files here or

Max. file size: 32 MB.

10. How often will you need to clean the cyclone? Do you need an easy clean design?

10. How often will you need to clean the cyclone? Do you need an easy clean design?

11. What scope of supply do you want?

11. What scope of supply do you want?

Cyclone

Fan

Discharge valve

Support steel

Differential pressure gauge

Other

Other scope of supply(Required)

12. What electrical supply is available? Is pneumatic air available?

12. What electrical supply is available? Is Pneumatic air available?

13. Is this an existing application?

13. Is this an existing application?

Yes

a. What are you using now?

b. Why are you changing?

c. Are there any parameters we should know about?

14. Is there any other information that would be helpful?

14. Is there any other information that would be helpful?

Describe here or attach pictures/sketches/etc. below.

Additional pictures/sketches/etc.

Drop files here or

Max. file size: 32 MB.

15. Are you thinking about a GPC or SplitStream Collector?

15. Are you thinking about a GPC or SplitStream Collector?

GPC

SplitStream

Traditional TR

16. What is the timing of this project?

16. What is the timing of this project?

On site pilot testing, Aerodyne facility pilot testing, and particle size distribution testing are now available. Check with factory for availability.

Phone

This field is for validation purposes and should be left unchanged.

Visit our partner site, www.abanaki.com, for information about oil skimmers.

DUST COLLECTORS
SplitStream Cyclone
GPC Cyclone Dust Collector
Specialists In Small

AIRLOCK VALVES
Vacu-Valve
Double-Dump Valve
Rhino Rotary “R” Valves
Mighty Whopper Valve
StopTight Knife Gate Valve

INDUSTRIES
Pharmaceutical
Food and Grain
Abrasives
Mining and Quarry
Foundry and Metal
Chemical Processing
Glass
Wood
Coffee Roasting

APPLICATIONS
Cyclone and Valve Applications

ADDITIONAL INFORMATION
About Aerodyne
About Dust Collection
Dust Efficiency Clinic
Contact Information
Privacy Policy