 |
 |
Aerodyne Rhino Rotary R Valve™
See complete product details.
The Aerodyne Rhino Rotary "R" Valve is designed for continuous discharge of dry, free-flowing, low-abrasive solids in gravity flow or low-pressure systems. Widely used in applications such as the bottom of cyclonic dust collectors and baghouse hoppers, the Rhino Rotary "R" Valve's steel plate construction gives it a distinct advantage in quality, flexibility and durability over cast valves.
- Heavy duty steel plate fabrication.
- Shrouded rotor.
- Neoprene rubber tips.
- Can handle temperatures to 175°.
- Stainless steel optional.
- Available with TEFC or Explosion proof
motor.
- Operates under vacuum or pressure.
- Custom sizes available
 |
 |
|
 |
| Platypus |
|
Armadillo |
|
|
Aerodyne Vacu-Valve® Platypus
and Vacu-Valve® Armadillo
See complete product details.
Trickle Valves
The open-construction Platypus and the closed-construction
Armadillo are the most economical ways to manage dust discharged from
bag filters or cyclones under negative pressure. The fitted duckbill sleeve adjusts
to the desired vacuum and material is continuously discharged. It requires
no controls, lubrication or power supply and easily handles abrasive materials. The
valve can be used in higher temperature applications as well. The Vacu-Valve® trickle
valve is available at a fraction of the cost of the rotary airlock valves it
replaces. Available in 8" flange size only.
- Inexpensive
- No power source needed
- Carbon or stainless steel
Armadillo 8RCN (enclosed) and Platypus 8RN (open) depicted at left.
View Vacu-Valve Animated Demo.
|
 |
|
See complete product details.
Aerodyne has a large selection of Knife Gate Valves which can be used to
handle a variety of materials and operating conditions. From low-cost
manual valves to pneumatic and hand crank valves, Aerodyne has a knife gate
for almost any application.
A variety of sizes are available in both round and square configurations.
Aerodyne has knife gate valves for open hopper discharge or in-line use with
some capable of closing through a static column of material.
|
 |
|
See complete product details.
Aerodyne StopTight® Slide Gate Valves are reliable, dust-tight
components for controlling flow in a bulk material handling system. The
unique slide gate drive action eliminates the need for racks, pinions, cams,
or other internal mechanisms that tend to interfere with valve operation. A
leaf spring assisted slide plate seals against the inlet collar to provide
an air tight seal when closed.
View Slide Gate Valve Demo.
|
 |
|
See complete product details.
The GatorGate Double-Dump valve feeds and moves chunky or fibrous material that would jam
ordinary rotary valves and is durable enough to move abrasive material. The
GatorGate valve uses tandem gates to maintain proper pressure above and below
the valve and has a reinforced closure mechanism to prevent air seepage. This double flap,
material handling valve can be configured to operate using air or electricity and requires
little maintenance.
- Heavy duty carbon steel fabrication
- Heavy duty gear reducer and cam mechanism
- Explosion proof motors available
- Pneumatic air cylinder or diaphragm actuator models available
Double-Dump SD Valve depicted at left.
View the GatorGate™ Double Dump animated Demo.
|
 |
|
Aerodyne Rhino Rotary H Valve™
See complete product details.
The Aerodyne Rhino Rotary "H" Valve's heavy duty steel plate construction and tight tolerances
provide exceptional performance in handling highly-abrasive materials when compared to competing cast valves.
Hardened-surface rotor vane tips and added clearance outside the the rotor shroud allow the rotary "H" Valve to
operate smoothly without packing or excessive wear. This tough material handling valve is equipped with a
standard 4 vane rotor, outboard bearings for easy maintenance, and a TEFC motor.
The Aerodyne Rhino Rotary "H" Valve acts as a rotary airlock feeder and suits a wide range of applications in industries
where dry free-flowing powders, granules, crystals, or pellets are used. The "H" Valve easily handles cement, ore, sugar, minerals,
grains, plastics, dust, fly ash, flour, lime, coffee, cereals, pharmaceuticals, and more. This rugged and dependable valve is ideal
for nearly any abrasive material application.
- Heavy Duty steel plate fabrication
- Shrouded rotor
- Abrasive resistant
- Hardened-Tip Steel Rotor
- Custom sizes available
Rotary H-Valve AER-H8n5 depicted at left.
|
